Enthermics 12-Blanket Warming Cabinet: DC350
Enthermics 12-Blanket Warming Cabinet: DC350
Enthermics 12-Blanket Warming Cabinet: DC350
Price
$0.00
Contact Us
About this Product
About this Product
Product Description:
Enthermics 12-Blanket Warming Cabinet: DC350: The countertop DC350 blanket warmers are quiet with no moving parts, which makes the unit great for labor and delivery rooms, ICU and NICU. The patient-friendly design allows you to put these aesthetically pleasing units right where they are needed, allowing nurses and aides to maximize their time.
Additional DC350 Features: Staff are able to place more emphasis on comfort and care with the relaxing, blue lights inside the warmers that soften the patient’s room. The Designer Series blanket warmers quickly and efficiently heat blankets to precise temperatures using WarmSafe™ zone heating technology. The heated shelves ensure every blanket is safely and evenly warmed by adjusting temperature throughout the cabinet. Our fan-less technology is designed to provide quiet warmth for patients, allowing them to get the rest they need for recovery. And, with the absence of lint-clogged fans, these units are safe and easy to maintain. See tabs for more information.
- LED interior lighting casts a comforting blue glow with two (2) different intensity settings, and off mode
- In the event of a power failure the cabinet will remember its programming and begin to operate as before when power is restored
- A warming shut-off system, separate from the electronic control, prevents overheating
- Access point and plug has been added in the back panel to allow the appliance owner to add their data logger or temperature management hardware
- Single-chamber warming cabinet White epoxy-coated steel exterior casing and interior insert
- Glass Door: Single pane, energy efficient, e-coated glass window in door allows for inventory observation and reflects heat back into the cavity
- Convenient: The hands-free, push button door is designed to make loading easier when carrying an armful of blankets
- Door is fully gasketed and hinged on the right side of the unit WarmRight® incorporates a multiple zone warming technology that heats where and when it is needed
- All chamber surface temperatures are monitored, providing an efficient balance of heat, low energy consumption and minimal heat loss
- Includes a heated center shelf to further optimize heat distribution throughout the cavity
- Mix and Match: Pair with a Designer Series fluid warming cabinet to complete your patient warming system – Stacks with up to two DC250 blanket warmers
- Furnished with four (4) 3/4″ non-skid rubber feet
- Mobile: Optional casters or mobile cart available, sold separately
General Specifications:
-
- Chamber: Single-chamber warming cabinet
- Lighting: LED
- Capacity: 10-12 blankets (3.5 ft3)
Dimensions: 27.9 in H x 18.5 in W x 24.8 in D
- Interior/Exterior: White epoxy-coated steel exterior casing and interior insert
- Window: Single pane, energy efficient, e-coated glass
- Door Release: Push-button door release
- Door: Fully gasketed and hinged on the right side of the unit
- Warming Zones: Multiple zone warming technology
- Temperature Monitoring: All chamber surface temperatures are monitored
- Furnished with four (4) 3/4″ non-skid rubber feet
Transport and storage environmental Conditions (not to exceed 15 days):
- Ambient temperature range of -40° to +70°C
- Relative humidity range of 10% to 95%, non-condensation
- Atmospheric pressure range of 50KPa to 106KPa
Operational environmental Conditions:
- Unit must acclimate to room temperature in the environment it will be placed. 24 hours is recommended
- Recommended environmental temperature range is 15°C to 32°C (60°F to 90°F)
- Recommended relative humidity is above 20%, non-condensation
Control:
- Adjustable temperature range of 37 – 82°C (98 – 180°F)
- Operates in Celsius or Fahrenheit
- Four digit LED display
- On/Off key
- Up and down arrow keys
- Actual temperature key
- Interior light key
- Built-in speaker for audible feedback
- Built-in control button lock-out feature
Enthermics Designer Series Warming Cabinet Brochure (click to view)
Available Options Sold Separately: All options must be specified at time of order
3” Bumper & Caster Assembly – overall height increases by 5″:
- White epoxy coated – 5017546
- Stainless Steel – 5017548
3” Plate & Caster Assembly – casters (2 rigid, 2 swivel with brake), overall height increases by 5”:
- White epoxy coated – 5017542
- Stainless Steel – 5017544
3″ casters (4 swivel; 2 with brake); overall height increases by 4.3″:
- 5012693
Door Assembly, Blue epoxy coated without manual door lock is standard:
- Blue epoxy coated with manual door lock (optional)
- Stainless Steel without manual door lock (optional)
- Stainless Steel with manual door lock (optional)
Seismic Mounting Brackets:
- Special installation requirements apply, overall width increases 2″: 1014403
Stacking Kits: (It is recommended that fluid warming units be placed at or near the bottom of the stacked configuration whenever possible for maximum stability)
- Double Stacked, White epoxy coated: 5013021
- Double Stacked Stainless Steel: 5017272
- Triple Stacked, White epoxy coated – 5017537
- Triple Stacked, Stainless Steel – 5017539
Cart :
- Dimensions – 34-1/2″ H x 24″ W x 26″ D: 5018614
Timer Control:
- Optional timer allows the user to program the warmer to automatically turn on and off at a selected time (Available with original order only)
